HANAFY REMOVER No1

Remover No. 1 HANAFY

Composition : magnesium oxide, zinc oxide, water, glycerin, isopropanol.

Description:
Mineral remover with alkaline pH (7.7). White opaque liquid requiring thorough mixing and shaking before use.
In case of excessive thickening, dilution is allowed using Thinner from Hanafy.

Instructions:
You should work with a 3 RL needle, in short, dense strokes, evenly passing all the areas necessary for removal.
To achieve results, make two full passes over the entire area to be removed.
Only preliminary anesthesia is used; secondary anesthesia is not used during the work.
After each pass, leave the remover on the skin for 3-5 minutes, then gently wipe with chlorhexidine.
After the second pass, you can use a salt activator to enhance the result – either applying it as a mask to the treated area for 5 minutes, or diluting the remover 1 to 1 and making the third pass with lighter movements, as when spraying permanent makeup.

Care after the procedure:
1 day – do not touch.
Starting from the second day, lubricate twice a day.
The remaining restrictions are the same as for PM (do not soak, do not steam, do not sunbathe, do not subject to mechanical damage).
Repeated procedure – no earlier than after 6 weeks.