Terralin® protect – Quaternary ammonium Disinfecting surfaces
- good spectrum of activity (limited spectrum of virucidal activity)
- based on QAV
The product is suitable for disinfecting surfaces and medical devices. As a long-established product, it is used in all hospital areas and can be combined with schülke s&m cleaning additive and schülke s&m care additive. As this product contains cationic active ingredients, the combination with cleaning agents, cleaning additives or wipe care products can affect the microbiological effectiveness and cause problems during application. schülke should therefore be consulted before attempting mixing the products.Prepare the working solution in the desired concentration. Wet clean surfaces, e.g. floors and other wipeable surfaces. Ensure complete wetting of the surfaces. Ensure that all visible dirt is removed before disinfection. Allows dosing via centralized and decentralized dosing devices. schülke dosing aids can be used for dosing. After completing the work, dispose of the working solution and clean the equipment thoroughly with water. Depending on the type of floor, additional care may be useful. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices!
bactericidal EN13727, EN16615 – dirty conditions |
0.5 % (5 ml/l) | 60 min. |
tuberculocidal EN14348 – clean conditions |
2 % (20 ml/l) | 240 min. |
yeasticidal EN13624, EN16615 – dirty conditions |
0.5 % (5 ml/l) | 60 min. |
virucidal against enveloped viruses EN14476 – dirty conditions |
0.5 % (5 ml/l) | 15 min. |
limited spectrum virucidal activity EN14476 – clean conditions |
1 % (10 ml/l) | 240 min. |
Norovirus (MNV) EN14476 – clean conditions |
1 % (10 ml/l) | 240 min. |
Norovirus (MNV) EN14476 – clean conditions |
2 % (20 ml/l) | 120 min. |
Polyoma SV40 in accordance with DVV (German Registered Association for Combating Viral Diseases |
2 % (20 ml/l) | 120 min. |
Rotavirus EN14476 – clean conditions |
0.5 % (5 ml/l) | 60 min. |
Composition:
100 g solution contains the following active substances:
22 g Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-C16)), 17 g 2-Phenoxyethanol, 0.9 g Amines, N-C12-C14 (even numbered)-alkyltrimethylenedi-, reaction products with chloroacetic acid)
Labelling according to Regulation (EC) No. 648/2004:
5 – 15 % non-ionic surfactants, perfumes